Pike-devel

pike-devel@lists.lysator.liu.se

2 participants
3046 discussions

Pike dumping core on GTK post module - Mandrake 9.0
by Honza (hop) Petrous ＠ Pike (-) developers forum 02 Nov '02

02 Nov '02

Hmm, I just switched to Mandrake 9.0 and now I'm not able to compile Pike (I only added a "(%d)" to show a shift size in stralloc.c): [ .. snip .. ] make[3]: Entering directory `/root/7.3-cvs-021030/build/std/post_modules/GTK' Makefile:279: warning: overriding commands for target `depend' Makefile:202: warning: ignoring old commands for target `depend' /root/7.3-cvs-021030/build/std/pike -DNOT_INSTALLED -DPRECOMPILED_SEARCH_MORE -m/root/7.3-cvs-021030/build/std/master.pike /root/7.3-cvs-021030/src/post_modules/GTK/new_build_pgtk.pike --source='/root/7.3-cvs-021030/src/post_modules/GTK/source/'\ /root/7.3-cvs-021030/src/post_modules/GTK/output/few.pike /root/7.3-cvs-021030/src/stralloc.c:155: Fatal error: Illegal shift size (135208384)! Attempting to dump backlog (may fail)... make[3]: *** [compile1] Segmentation fault (core dumped) make[3]: Leaving directory `/root/7.3-cvs-021030/build/std/post_modules/GTK' make[2]: *** [GTK] Error 1 make[2]: Leaving directory `/root/7.3-cvs-021030/build/std/post_modules' make[1]: *** [post_module_objects] Error 1 make[1]: Leaving directory `/root/7.3-cvs-021030/build/std' make: *** [all] Error 2 And now backtraces from gdb: [root@elrond std]# ./pike -DNOT_INSTALLED -DPRECOMPILED_SEARCH_MORE -m/root/7.3-cvs-021030/build/std/master.pike /root/7.3-cvs-021030/src/stralloc.c:155: Fatal error: Illegal shift size (135208384)! Attempting to dump backlog (may fail)... Segmentation fault (core dumped) [root@elrond std]# gdb ./pike GNU gdb 5.2.1-2mdk (Mandrake Linux) Copyright 2002 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i586-mandrake-linux-gnu"... (gdb) r -DNOT_INSTALLED -DPRECOMPILED_SEARCH_MORE -m/root/7.3-cvs-021030/build/std/master.pike Starting program: /root/7.3-cvs-021030/build/std/pike -DNOT_INSTALLED -DPRECOMPILED_SEARCH_MORE -m/root/7.3-cvs-021030/build/std/master.pike /root/7.3-cvs-021030/src/stralloc.c:155: Fatal error: Illegal shift size (135208384)! Attempting to dump backlog (may fail)... Program received signal SIGSEGV, Segmentation fault. 0x08067e84 in eval_instruction (pc=0x83225c4 "\x{0104}\020\x{0104} \b\203@\034\022\x{0104}") at /root/7.3-cvs-021030/src/interpret.c:871 871 return 0; (gdb) bt #0 0x08067e84 in eval_instruction (pc=0x83225c4 "\x{0104}\020\x{0104} \b\203@\034\022\x{0104}") at /root/7.3-cvs-021030/src/interpret.c:871 #1 0x08067ec1 in eval_instruction (pc=0x402133e0 "\006") at /root/7.3-cvs-021030/src/interpret.c:901 #2 0x0806b49d in opcode_F_BRANCH_WHEN_GE () at /root/7.3-cvs-021030/src/interpret_functions.h:1088 #3 0x0832269d in ?? () #4 0x08071550 in mega_apply (type=134643328, args=134643328, arg1=0x8067e80, arg2=0x8067e80) at /root/7.3-cvs-021030/src/interpret.c:1431 #5 0x080a32ce in debug_fatal (fmt=0x402d7000 "\x{0155}3!@ 3!@") at /root/7.3-cvs-021030/src/error.c:397 #6 0x080f32fb in index_shared_string () at /root/7.3-cvs-021030/src/stralloc.c:155 #7 0x08117ad2 in append_path_unix (s=0xbffff668, path= {ptr = 0x82a24cc "/root/7.3-cvs-021030/build/std/lib/modules/Getopt.pmod", shift = 0}, len=54) at /root/7.3-cvs-021030/src/combine_path.h:110 #8 0x08117c9e in f_combine_path_unix (args=2) at /root/7.3-cvs-021030/src/stralloc.h:89 #9 0x0806ed3b in opcode_F_CALL_BUILTIN_AND_RETURN (arg1=134643328) at /root/7.3-cvs-021030/src/interpret_functions.h:2061 #10 0x083187ea in ?? () #11 0x08071550 in mega_apply (type=134643328, args=134643328, arg1=0x8067e80, arg2=0x8067e80) at /root/7.3-cvs-021030/src/interpret.c:1431 #12 0x08072179 in apply (o=0x402d7000, fun=0x8067e80 "\x{0154}u\r1\x{0154}\211\x{011B}]\x{0102}\215´&", args=-72) at /root/7.3-cvs-021030/src/interpret.c:1734 #13 0x080c193d in main (argc=4, argv=0xbffff884) at /root/7.3-cvs-021030/src/main.c:726 #14 0x400b7082 in __libc_start_main () from /lib/i686/libc.so.6 (gdb)

1 0

Re: Proposal for new ADT interface
by Leif Stensson, Lysator ＠ Pike developers forum 29 Oct '02

29 Oct '02

Sure, but this is supposed to be a master thesis work. Just adding wrappers to existing datatypes seem more like a weekend's work, or less. So I wondered if there was something more to it than it seemed from the description Peta just gave. / Leif Stensson, Lysator Previous text: >2002-10-28 18:54: >Subject: Re: Proposal for new ADT interface >-------------------------------------------------------------------- >Isn't the point to build a base standard, to later extend it with >other abstract datatypes? > > > > / Brevbäraren >

3 2

References to Thread.Mutex
by Martin Stjernholm, Roxen IS ＠ Pike developers forum 28 Oct '02

28 Oct '02

I've now fixed a ref from Thread.MutexKey to Thread.Mutex.

1 0

allocate_mapping
by Martin Nilsson (Fake Build Master) ＠ Pike (-) developers forum 27 Oct '02

27 Oct '02

What is the size-argument to allocate_mapping? The maximum number of entries or the expected number of entries?

2 2

pike 7.3 Thread.Condition.wait and roxen.pike
by Martin Nilsson (Fake Build Master) ＠ Pike (-) developers forum 25 Oct '02

25 Oct '02

Default is perhaps more desriptive.

1 0

Xenofarm and Pike binary export.
by Xavier Beaudouin - Kiwi ＠ Pike developers forum 25 Oct '02

25 Oct '02

Howdy, Seems that I have trouble on one machine behind my dsl link... Since binary export is setup here, I cannot send result, timeout is allways reached and the result is queued forever. Is there any way to either : - fix this ? - to separe binary export from results sending ? - to avoid binary export ? Thanks ----/ Sample output /----- Resending rescue_default/ThuOct24132406CEST2002/xenofarm_result.tar.gz Host: pike.ida.liu.se File: generated/pikefarm/packages/result Port: 80 flen: 4669808 IP : 130.236.182.30 Connecting...done sending request..done sending data..[loong time]Failed to resend. Resending in the next client run. ----/ end / ----------------

2 2

mktime
by Martin Nilsson (Fake Build Master) ＠ Pike (-) developers forum 24 Oct '02

24 Oct '02

Wouldn't it be simpler to write a mktime function from scratch to use instead of getting the OS-ones to work?

3 3

More warnings to ignore
by Peter Bortas ＠ Pike developers forum 24 Oct '02

24 Oct '02

These warnings should be ignored by the Xenofarm parser: checking whether we can locate it anyway...... warning: locate: warning: database /var/lib/slocate/slocate.db' is more than 8 days old Makefile:278: warning: overriding commands for target `depend' Makefile:201: warning: ignoring old commands for target `depend' Makefile:241: warning: overriding commands for target `depend' Makefile:189: warning: ignoring old commands for target `depend'

1 0

7.3 -> 7.4
by Peter Bortas ＠ Pike developers forum 23 Oct '02

23 Oct '02

Are we ready to move the repository?

6 11

Problem in LDAP module
by Marcus Agehall (Tr�dl�s) ＠ Pike (-) developers forum 22 Oct '02

22 Oct '02

I made a few posts a while back about a problem within the Protocols.LDAP module. I never got to the bottom of it then but now I need to solve it. The problem is that when I use Pike to modify data within my LDAP-server, the attributes seems to get a <crlf> appended to the data. It appears to be a problem when reading the modified data with ldapsearch included with my LDAP-server, not when reading the data thru Pike. Can anyone confirm this problem, or even better, suggest a solution to it?

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

Pike-devel